Primary Navigation

Paintless Dent Repair Light Board

Paintless Dent Repair Light Board

What is a PDR light?

PDR lights are an essential part of dent repair. The process includes reading the reflection of the PDR light off the panel to repair panel damage. Dent Repair Lights used to consist of a fluorescent type of light bulb modified to cast a larger area of fog.[1]

Does PDR work on plastic?

Our pdr technicians are able to push the plastic back out to its original shape. The bumper would have to be replaced if the plastic is ripped when the damage occurs. Once the plastic is ripped or all of the clips that hold the bumper cover onto the car have been torn, then you’d have to replace that bumper cover.[2]

What size dent can PDR repair?

Most (about 95%) minor dents can be repaired. About 5% of minor dents can’t be fixed due to depth or location. Areas such as some quarter panel opening lips, some forward areas of heavily braced hoods, or the very edges of some panels are examples of bad locations.[3]

What is the best glue stick for PDR?

Infinity Bond Black Dog paintless dent repair (PDR) glue sticks set the standard in quality for the dent repair industry. These glue sticks are custom formulated to perfectly meet the demands of bonding to coated metal surfaces and manufactured in the USA to the highest quality standards.[4]

How do you get dents out of plastic?

Apply boiling water to the dented area. Aim a heat gun or hair dryer at the dented area for about three minutes. Use a suction dent puller to grab and pull the dented portion back into its original form. Book a paintless dent repair job at a qualified repair shop.[5]

How do you get dents out of car panels?

Start off by heating the car dent with the hair dryer at its highest temperature, which will expand the plastic of the car. As soon as it’s hot enough, grab the can of compressed air, turn it upside down, and begin spraying that same area. Since the cold air will cause the plastic to contract, the dent will pop out.[6]

Do dent pullers work?

Do they work? Dent pullers only work on shallow dents that are positioned on a flat, flexible surface. They can improve the appearance of car dents but are unlikely to create a perfect finish. Unfortunately, DIY dent pullers will not work on deep, angular dents or damage along the edges of bodywork.[7]

What is considered a small dent?

Generally speaking, a “ding” is classified as a small region of damage done to a vehicle, spanning no more than about . 5 inches in diameter. This kind of damage often has little to no affect on your vehicle’s exterior paint job.[8]

What is a medium size dent?

• Door Dents and Dings – Sized 2 Inches or Less. • Small Dents – 3 to 5 Inches in Diameter. • Medium Dents – 5+ to 10 Inches Long. • Large Dents – Approximately 10 Inches or Larger.[9]

Are PDR glue sticks different?

Remember each coloured version has it’s own strengths and performance characteristics and will perform differently depending on the ambient temperatures at the time of use and the type of glue gun used.[10]

What will hot glue not stick to?

Hot glue will not stick to very smooth surfaces, like metal, silicone, vinyl, wax, or greasy and wet surfaces.[11]

Can plastic bumper dents be repaired?

Replacement bumper covers can cost more than $1,000. But dents in the soft plastic bumper covers on cars and SUVs can often be smoothed out at home by applying heat and a little elbow grease. It takes a bit of patience, and certainly experience helps.[12]



Leave a Reply

Your email address will not be published.