Primary Navigation

paintless dent repair training online

Paintless Dent Repair Training Online

How hard is PDR?

PDR is hard to learn because it involves seeing, interpreting, and doing things that you have never done before. In fact, many skills learned in PDR are exactly opposite of everything you’ve probably ever done. The first difficulty is just finding your tool tip underneath a panel.[1]

Can all dents be pulled out?

Can All Dents Be Suctioned Out of a Car? Not all dents can or should be suctioned out. If the dent is large, the suction method may not work. Additionally, if there are any cracks in the panel, the entire panel should be replaced, rather than having the dent removed.[2]

Do car detailers fix dents?

Dent removal can be done in conjunction with scratch repair by our auto detail professionals. Dent repair usually involves using special tools and instruments to push the dents out from the inside, while sometimes pulling from the outside of the panel.[3]

What is a PDR light?

PDR lights are an essential part of dent repair. The process includes reading the reflection of the PDR light off the panel to repair panel damage. Dent Repair Lights used to consist of a fluorescent type of light bulb modified to cast a larger area of fog.[4]

Will boiling water get a dent out of car?

Use boiling water Don’t just limit your use of boiling water for cooking and sanitary purposes. It can also be used to potentially remove unwanted depressions in your vehicle, that is, as long as you have a plastic bumper and are successfully able to access the dent from the backside.[5]

Do it yourself hail dent removal?

Leave the car in direct sunlight so that it heats up and is hot to the touch. Place small pieces of dry ice in the center of the dents for a few seconds and remove them. The dents will pop out on their own. Wipe the area down with a soft clean cloth.[6]

Is paintless dent removal any good?

Paintless dent repair (or PDR) is widely considered the most cost-effective, quickest, and most environmentally friendly solution to vehicle dent repairs. A good analogy would be a minor scratch on your arm compared to a more severe cut or laceration.[7]

Does WD 40 Remove car scratches?

No matter how careful you are with your car, a scratch or scuff mark is going to appear. While WD-40 Multi-Use Product cannot help in situations where the metal has been damaged, it can help with scuff marks, where another car has come into contact with yours and left some paint residue.[8]

Does mopping a car remove scratches?

It is a higher level of service than valeting and is most commonly used with reference to machine polishing (mopping), which can remove defects such as swirl marks, marring, minor scratches and dull, lifeless paintwork.[9]

What is the best glue stick for PDR?

Infinity Bond Black Dog paintless dent repair (PDR) glue sticks set the standard in quality for the dent repair industry. These glue sticks are custom formulated to perfectly meet the demands of bonding to coated metal surfaces and manufactured in the USA to the highest quality standards.[10]

Will a plunger remove a car dent?

Put the plunger over the indented area and pull straight out. Your dent should pop right out. If you’re working on a bumper, you can also reach behind the dented surface to push the dent out. Repeat as needed until the dented area is flattened out.[11]

How do you get a sharp dent out of a car?

Heat the affected area with your dryer, heat gun, or hot water. Less severe dents may pop out on their own with the application of enough heat. If the dent won’t pop out, use a suction cup or rubber mallet to pull or gently hammer the dent out.[12]



Leave a Reply

Your email address will not be published. Required fields are marked *