Primary Navigation

Seattle Car Dent Repair

Seattle Car Dent Repair

How much does it cost to pop a dent out of a car?

The dent repair cost may range from $50 to $2,500. Although that’s a broad range, most small dents that are roughly an inch in size may cost around $50 to $125. Small indentations may come from a flying rock or piece of hail. Dents stemming from a collision are typically larger and cost $150 or more.[1]

Are car dents worth fixing?

Reduced resale value. Things like unrepaired dents can lower the value of a used car, even if they’re small. Add paint damage and rust spots to these car dents, the price a buyer is willing to pay goes down even more. Furthermore, unrepaired dents are a sign of a neglectful owner.[2]

Are dent removal kits any good?

They can improve the appearance of car dents but are unlikely to create a perfect finish. Unfortunately, DIY dent pullers will not work on deep, angular dents or damage along the edges of bodywork. Dents in areas of thick metal are very difficult to remove at home.[3]

How long does it take to fix a dent in a car?

For traditional car dent repair, you’re probably looking at between 2 days and 2 weeks. If the damage qualifies for Paintless Dent Repair, the dent could be fixed in as little time as an hour. Car dents could take a few hours to repair or they could take a couple of weeks.[4]

How much does it cost to fix a quarter panel dent?

Fixing a quarter panel will likely cost around $2,000, unfortunately. Body panel repairs, including quarter panel repairs, are usually expensive.[5]

Can you pop dents out of a car?

Pop out the dent with a hair dryer and compressed air This will expand the dent and make it more pliable. When the car is hot to the touch, immediately spray the dented area with a can of compressed air. The cold air coming from the can will cause the area to contract. This should make the dent pop out.[6]

What happens if you don’t fix a dent?

Unrepaired dents can encourage rust to develop. Perhaps the most important reason why you should bring your car into the shop for dent repair is that unrepaired dents will encourage rust to form.[7]

What happens if you don’t fix a dent in your car?

If the dent has resulted in minor cracks, it might allow water to reach the metal part of the car as it seeps below the clear coat and paint. If it is not fixed in time, the metal with react with water and oxidize leading to rust spots.[8]

Do suction cup dent pullers work?

They can improve the appearance of dents but probably won’t create a perfect finish. But these tools will not work on deep, angular dents or damage along the edges of bodywork. Dents in areas of thick metal will also be very difficult to remove at home.[9]

How do professionals fix car dents?

Once the dent is pulled out, the mechanic may use a filler to restore the even surface of the car’s body. After applying a filler and hardener to the vehicle, the mechanic will sand the area until it is smooth and paint it to blend in with the rest of the car’s body.[10]

How do you pop out a dent?

First, heat the dent with the hairdryer approximately six inches away for about 30 seconds. Then cover the dent with a piece of aluminum foil and rub dry ice over it. The rapid change from hot to cold should make the dent pop out within a minute or so. Another temperature trick involves boiling water.[11]

How much does a small dent devalue a car?

An average accident can decrease a car’s value instantly (and permanently) by 10 – 25% annually, whereas an accident that only creates light damage (such as light scratches or small dents that don’t impact the paint) will only decrease its value by 5-15%.[12]



Leave a Reply

Your email address will not be published.