Primary Navigation

small car dent repair tool

Small Car Dent Repair Tool

Do dent pullers work on small dents?

Dent pullers only work on shallow dents that are positioned on a flat, flexible surface. They can improve the appearance of car dents but are unlikely to create a perfect finish. Unfortunately, DIY dent pullers will not work on deep, angular dents or damage along the edges of bodywork.[1]

Can you fix small car dents?

The dent should pop out in less than a minute. If none of the household methods work, it is time to invest in a dent removal kit. These kits are successful at popping most minor dents. You can purchase one at an auto parts store, and it will cost far less than hiring a professional.[2]

What tool can be used for dent removal?

Super PDR Paintless Dent Repair. Super. Hand Tools Dent Repair Kit. GS. Dent Removal Rods Set. $116 AT AMAZON. Auto Body Dent Repair Kit. $42 AT AMAZON. Paintless Dent Kit. MMPP. Auto Body Shaping and Forming Repair Kit. $40 AT AMAZON. Suction Cup Pump. Zuos. Bondo Professional Gold Filler Kit.[3]

How much is it to fix a small dent on a car?

Small dings with paintless dent repair may cost between $200 and $500, while larger dents that need paint repair can cost between $1,000 and $3,000.[4]

Does boiling water remove dents in metal?

Unfortunately, this technique can be used only on plastics, which can be reshaped by using heat. Metal does not respond in the same way to heat as plastic does. So, do NOT attempt to fix metal dents with boiling hot water.[5]

What is the best dent puller to buy?

Best Quality Dent Pullers—PDR Auto Paintless Dent Repair Kits. Top Rated PDR Kit—Mookis Paintless Dent Repair Kit. Best Professional Tools for Home Use—Eastwood Auto Body Paintless Dent Removal Tools Kit. Best Suction Cup Tool—Laguna Aluminum Suction Cup Lifter.[6]

What size dent puller do I need?

The use of a suction dent puller really is dependent on the size of the cup attached to the puller. The larger one with the 6” cup can be used to pull up to 6 inch dings. Some of the dent pullers have a 4” cup, so this obviously will work on smaller areas.[7]

How do you fix a small dent in a car with a plunger?

Put the plunger over the indented area and pull straight out. Your dent should pop right out. If you’re working on a bumper, you can also reach behind the dented surface to push the dent out. Repeat as needed until the dented area is flattened out.[8]

Does hot water really fix dents?

Use boiling water It can also be used to potentially remove unwanted depressions in your vehicle, that is, as long as you have a plastic bumper and are successfully able to access the dent from the backside.[9]

Will boiling water damage car paint?

It could warp the metal out of shape, make it less sturdy; it could even ruin your paint job if your paint isn’t up to par.[10]

How can I remove dents myself?

Heat the dented area of your vehicle with a hair dryer at the highest setting possible. Get it as hot as possible and then use a can of compressed air to blow on the dent. The cold air will contract the plastic and allow the dent to pop out on its own.[11]

Can you pull dents out of cars?

Pop out the dent with a hair dryer and compressed air This will expand the dent and make it more pliable. When the car is hot to the touch, immediately spray the dented area with a can of compressed air. The cold air coming from the can will cause the area to contract. This should make the dent pop out.[12]



Leave a Reply

Your email address will not be published. Required fields are marked *